Maguerit - lige tal
Pris ekskl. moms
3.200,00 kr.
Pris inkl. moms
4.000,00 kr.
Beskrivelse
Maguerit - lige tal
Magueritblomsten lavet i termoplast.
Maguerit blomsten med lige tal.
Blomsterne kan laves på flere måder.
Fx. med lige tal, ulige tal, matematiske symboler, bogstaver eller en helt anden løsning. Det er op til jer hvad I ønsker at udfylde de store magueritblade med.
Magueritblomsterne kan nemt bruges som en blot dekoration, hvor der samme tid vil være mulighed for at øve sig på tal eller regnestykker.
Materialet termoplast:
Blomsterne bliver lavet i termoplast, som har en holdbarhed i 8 - 10 år. Termoplasten bliver opvarmet til det er flydende, og derefter formes til blomster. Når processen er fuldført er blomsterne klar til at blive taget i brug. Alle vores priser er inklusiv landsdækkende montage.
Bestiller i 3 stk. giver vi den 4 maguerit med uden beregning!
En sjov måde at regne på kunne foreksempel være:
- Giv hinanden til opgave at finde frem til et bestemt tal via. bevægelse.
- Fx. hop 4 gange på en magurit med tal og få summen 16. Det kunne så være : 1 + 3 + 5+ 7
Ønsker du at blive klogere på asfaltdekorationer med termoplast? Læs mere lige her.
I er også altid velkommen til at kontakte os på mail eller telefon hvis I ønsker rådgivning eller et godt tilbud på termoplast.
Tlf. 70 26 75 88
Mail.: Post@Jisport.dk
Datasheet
| Field | Description |
|---|---|
| Brand | DecoMark |
| EU Brand Responsible | GEVEKO Markings |
| Country of Origin | Denmark |
| Material Composition | Preformed decorative thermoplastic. Approx. 20% binding agent, 30% titanium and white filler, 25% white sand and 25% glass beads |
| Contains Latex | No |
| Contains Hazardous Substances | No |
| Compliance | Contains none of the substance which is either on the Candidate List of substances of very high concern, or recommended for inclusion in Annex XIV or Annex XVII under REACH EC 1207/2006 |
| Intended Usage | Preformed thermoplastic decorative marking material for asphalt areas with none or low volume traffic such as playgrounds, bike routes, pedestrian routes and decorative areas. Application on non bitumen surface use primer. The combination of durability and anti skid make it ideally 'fit for purpose' |
| Product Description | Alkyd based preformed thermoplastic material capable of conforming to ground contours and geometries. Can be applied at temperatures down to 10 degrees Celsius. Below this temperature extra care must be taken during storage and application. Sets rapidly and allows reopening to traffic 20 minutes after application |
| System Recommendation | For retro and antiskid use drop on material UCme 850-180-25%. For high antiskid only use drop on material UCme Glass Grains 850-250 |
| Colour and Design | Available in 28 standard colours and various designs |
| Easy System | Can be supplied in Easy System to minimize the various pieces in the symbol or sign |
| Application Equipment | Conventional gas torch with post sprinkling of drop on material |
| Application Temperature | 200 to 230 degrees Celsius. All visible temperature indicators in the material must be closed |
| Adhesion Test | Perform a chisel test to verify adhesion |
| Set Up Time | 10 minutes at a surface temperature of 20 degrees Celsius and light breeze |
| Packaging | Flat packed in 60 x 100 cm and 50 x 50 cm boxes that protect against sunlight and moisture |
| Storage and Handling | Store flat and dry at temperatures above 2 degrees C and below 32 degrees Celsius with maximum 25 packs in height. Shelf life up to two years from production date |
| Safety | Not suitable for children under 3 years old |