Termoplast Badmintonbane
Varenummer:
C55-867
Prisen på denne vare beregnes ved forespørgsel. Kontakt os for et attraktivt tilbud.
Beskrivelse
Termoplast Badmintonbane
Badmintonbane opstreget med termoplast.
Datasheet
| Field | Description |
|---|---|
| Brand | DecoMark |
| EU Brand Responsible | GEVEKO Markings |
| Country of Origin | Denmark |
| Material Composition | Preformed decorative thermoplastic. Approx. 20% binding agent, 30% titanium and white filler, 25% white sand and 25% glass beads |
| Contains Latex | No |
| Contains Hazardous Substances | No |
| Compliance | Contains none of the substance which is either on the Candidate List of substances of very high concern, or recommended for inclusion in Annex XIV or Annex XVII under REACH EC 1207/2006 |
| Intended Usage | Preformed thermoplastic decorative marking material for asphalt areas with none or low volume traffic such as playgrounds, bike routes, pedestrian routes and decorative areas. Application on non bitumen surface use primer. The combination of durability and anti skid make it ideally 'fit for purpose' |
| Product Description | Alkyd based preformed thermoplastic material capable of conforming to ground contours and geometries. Can be applied at temperatures down to 10 degrees Celsius. Below this temperature extra care must be taken during storage and application. Sets rapidly and allows reopening to traffic 20 minutes after application |
| System Recommendation | For retro and antiskid use drop on material UCme 850-180-25%. For high antiskid only use drop on material UCme Glass Grains 850-250 |
| Colour and Design | Available in 28 standard colours and various designs |
| Easy System | Can be supplied in Easy System to minimize the various pieces in the symbol or sign |
| Application Equipment | Conventional gas torch with post sprinkling of drop on material |
| Application Temperature | 200 to 230 degrees Celsius. All visible temperature indicators in the material must be closed |
| Adhesion Test | Perform a chisel test to verify adhesion |
| Set Up Time | 10 minutes at a surface temperature of 20 degrees Celsius and light breeze |
| Packaging | Flat packed in 60 x 100 cm and 50 x 50 cm boxes that protect against sunlight and moisture |
| Storage and Handling | Store flat and dry at temperatures above 2 degrees C and below 32 degrees Celsius with maximum 25 packs in height. Shelf life up to two years from production date |
| Safety | Not suitable for children under 3 years old |
Information om montering af termoplast
Montering af termoplast
Alle vores termoplastløsninger leveres inklusive montering. Det betyder, at prisen på selve produktet også dækker den nødvendige montering på det klargjorte område.
| Anstillingsgebyr | Der tillægges et anstillingsgebyr på 2.900 kr. pr. projekt. Gebyret er det samme, uanset om projektet består af én asfaltdekoration eller flere forskellige termoplastløsninger. |
| Klargøring af området | Prisen inkluderer let rengøring og klargøring af området. Alle emner primes inden montering, så termoplasten får den bedst mulige vedhæftning til underlaget. |
| Montering på fliser | Ved montering af termoplast på fliser kan holdbarheden blive nedsat. Derfor gives der ikke garanti på installationer, som udføres på fliseunderlag. |
| Inden montøren ankommer | Området skal være ryddet inden monteringen begynder. Bordbænkesæt, møbler, løse genstande og andet inventar skal derfor være fjernet fra det område, hvor termoplasten skal monteres. |
Anstillingsgebyret gælder samlet for hele projektet. Derfor kan det ofte betale sig at samle flere termoplastløsninger i samme bestilling.